Roof Waterproofing Application

     
 

Job Description

This job entails the removal of existing waterproofing coating at the roof area and to re-apply waterproofing with Prosec 304. Necessary surface preparation was done after the removal of the old waterproofing membrane via wire-brush and High Pressure jet cleaning (2000 psi). The surface was subsequently primed at 200 micron thickness before 3 mm of Prosec 304 was trowelled over as the new waterproof coating.

Other Coatings Evaluated for Project: Epoxy coatings were evaluated but found ineffective as UV exposure may cause cracking.

 

 

Roof Project